Features of Slanting Bar Spot Welding Machine:
1 The equipment is used for welding 3D structural mesh plate by the slanting stell wires when the upper mesh plate and lower mesh plate and in-between panel of EPS is passed through the equiment.The equiment is also used for welding single surface stell wire mesh plate for external wall heat preservation.
2 Adopt wholly pneumatic operation mode with stable operation,good reliability and long equiment lifetime.
3 Adopt integrated pneumatic wire-clamping device for finishing the forward procedure.
4 Adopt the integrated self-adaptation wire-welding device for finishing the welding procedure.
5.Provice the self-checking function and the failure automatic alarm function with easy poreation adn easy maintenance.
6.Adopt PLC adn touch screen control,and can automatically finish to straighten,weld and cut the stell wire.
7.Can produce two kinds of panels with either dense or sparse insertion.
Main Technical Data of Slanting Bar Spot Welding Machine:
No.
Items
Type\ Unit
Specification
1
Main equipment dimension
mm
(L*M*T)4200X1850X2600
2
Weight
kg
6000
3
Power supply
380V 50HZ 75KVA
4
Steel wire diameter
mm
1.8-2.8
5
3D plate defect welding rate
c/o
<=1%(for single swface 30 panel)
<=3%(EPS <=80mm)
<=3%(for both surface of the 3D plate and the thickness of EPS <=80mm)
<=5%(EPS <=100mm)
<=5%(for both surface of the 3D plate and the thickness of EPS <=100mm)
6
GL plate diagonal error
mm
<=5
7
Production efficiency
s/step or m2/h
0.5s/step or 78m2/h
4.5s/step 48m2/h
8
Stand of forming machine
stands
19
9
Size of material
mm
(600~1000)×(0.4~0.8)×L
10
Material
EPS,PU,Mineral Wool
11
Suitable Material
Colored galvanized steel board
12
Controlling system
PLC
Square Grille Welding Machine
Features of Square Grille Welding Machine:
1 ZPW-330B Square Grille Welding Machine.The equipment is used for welding 3D structural mesh plate by the slanting stell wires when the upper mesh plate and lower mesh plate and in-between panel of EPS is passed through the equiment.The equiment is also used for welding single surface stell wire mesh plate for external wall heat preservation
2 Adopt wholly pneumatic operation mode with stable operation,good reliability and long equiment lifetime.
3 Adopt integrated pneumatic wire-clamping device for finishing the forward procedure.
4 Adopt the integrated self-adaptation wire-welding device for finishing the welding procedure.
5.Provice the self-checking function and the failure automatic alarm function with easy poreation adn easy maintenance.
6.Adopt PLC adn touch screen control,and can automatically finish to straighten,weld and cut the stell wire.
7.Can produce two kinds of panels with either dense or sparse insertion. Main Technical Data of Square Grille Welding Machine:
No.
Items
Type\ Unit
Specification
1
Main equipment dimension
mm
(L*M*T)4000X1800X1100
2
Weight
kg
2000
3
Power supply
380V 50HZ 75KVA
4
Steel wire diameter
mm
2.0-2.5
5
Welding intensity
N
>=330 pull-off force each spot>=330
6
Longitudinal error of the mesh
mm
<=+-2mm/m
7
Production efficiency
s/step or m2/h
2.3s/step or 93m2/h
8
Suitable Material
Colored galvanized steel board
9
Controlling system
PLC
Manual Re-welding Machine
Features of Manual Re-welding Machine:
1 Rollers are made of good steel, coated with rigid chrome.
2 The rubber feeding device of it can feed 0.5-1.5mm color steel sheets.
3 Light and convenient hoist, only 2kg (those from USA are 30kg). So quick and convenient installation is possible.
4 Large span, high corrugation, high tension strength, without nuts.
5. During production, it is unnecessary for you to adjust the clearance between top and bottom rollers. Main Technical Data of Manual Re-welding Machine:
No.
Items
Type\ Unit
Specification
DH25
DH35
1
Main equipment dimension
mm
(L*M*T)400X350X450
(L*M*T)400X350X450
2
Weight
kg
160
200
3
Power supply
380V 50HZ 15KVA
380V 50HZ 35KVA
4
Steel wire diameter
mm
1-2.5
3-4
5
Welding intensity
N
>=330 pull-off force each spot>=330
6
Suitable Material
Colored galvanized steel board
7
Controlling system
PLC
Steel Wire Cutting and Straightening Machine
Description of Steel Wire Cutting and Straightening Machine:
Steel Wire Cutting and Straightening Machine developed by us adopts the same technology with ABM MIC-240 forming machine. It is comprised of mechanical expansion decoiler, straight panel forming unit, hydraulic / electric mould cutting device, curving panel forming unit, control system, run-out racks for straight, curve panels and all other accessories and tools. For all parts are installed on a mobile chassis, our super K span roll forming machine is ideal for site working.
Features of Steel Wire Cutting and Straightening Machine:
1 Rollers are made of good steel, coated with rigid chrome.
2 The rubber feeding device of it can feed 0.5-1.5mm color steel sheets.
3 Light and convenient hoist, only 2kg (those from USA are 30kg). So quick and convenient installation is possible.
4 Large span, high corrugation, high tension strength, without nuts.
5. During production, it is unnecessary for you to adjust the clearance between top and bottom rollers.
Steel Wire Grooving Machine
Description of Steel Wire Grooving Machine:
This EPSSteel Wire Grooving Machine developed by us adopts the same technology with ABM MIC-240 forming machine. It is comprised of mechanical expansion decoiler, straight panel forming unit, hydraulic / electric mould cutting device, curving panel forming unit, control system, run-out racks for straight, curve panels and all other accessories and tools. For all parts are installed on a mobile chassis, our super K span roll forming machine is ideal for site working.
Features of Steel Wire Grooving Machine:
1 Rollers are made of good steel, coated with rigid chrome.
2 The rubber feeding device of it can feed 0.5-1.5mm color steel sheets.
3 Light and convenient hoist, only 2kg (those from USA are 30kg). So quick and convenient installation is possible.
4 Large span, high corrugation, high tension strength, without nuts.
5. During production, it is unnecessary for you to adjust the clearance between top and bottom rollers.
3D panel production line video
